Close
Drying chamber is designed to remove moisture from the surface of the workpiece by evaporation, by heating to the boiling point of water and evaporation in a stream of heated gas.
The advantages of drying chambers manufactured by Poliplast Ltd.:
Description
Drying chamber is designed to remove moisture from the surface of the workpiece by evaporation, by heating to the boiling point of water and evaporation in a stream of heated gas.
The advantages of drying chambers manufactured by Poliplast Ltd.:
- High speed of output at working temperature in parallel with decreasing power of electric heaters
- "Soft" heating of the parts, - no direct contact with the heating element
- Large amounts of dry parts
- Low noise level during operation of the installation (the use of high quality fans)
- Simple design provides high reliability, which leads to an immediate reduction in maintenance costs
- Controls direction of air flow
- Air knives (AIR BLADE)
- Heating temperature up to 140°C
- System of control and regulation of operating temperature
Standard equipment
- Carbon steel body, lined with stainless steel
- Thermal insulation
- Integrated support frame with adjustable feet
- High quality finish is chemical-resistant enamel
- Heater or heat exchanger
- The blower motor, mounted on anti-vibration mount
- Temperature sensor for intake air
- Protection sensor against overheating of electric heaters
- Pressure sensor of air flow
- Control system
Optional extra
- Cover
- Pneumatic or electric cover lids
- Catchers for mechanization
- Current lead of drive of rotation of cassette carriages
- Non-communicants rod, in the case of using the drying chamber in manually operarted lines
- System of air knives. For this system you need an additional connection high pressure air to the drying chamber
- Automatic temperature control system
- Automatic control system